Echelon i.LON 10 Guia do Utilizador

i.LON™ 10 Ethernet Adapter Quick Start Guide Version 1 005-0149-01A

Key, the Text Shared Secret will be cleared. The MD5 authentication key or shared secret entered here must match the key or phrase supplied to the xDr

Security Access Reset The following features of the i.LON 10 Ethernet Adapter are available only after performing a security access reset: • Access t

This page contains the following options: Allow HTTP Access Set this option to allow users to access the i.LON 10 web pages with the exception of th

default. Performing a security access reset resets the Password to ilon. Allow Incoming LNS Server Connections Set this option to allow connections i

2. The control panel applet lists the LNS network interface name of all the i.LON 10s that have been added to the Registry below the Default item. I

4. Click OK. This opens the tab shown in the following figure: 5. Configure the fields on the General tab. The following table describes these field

7. Configure the fields on the Address/Port tab. The following table describes these fields. Field Description i.Lon is listening on port: Default V

8. You can choose to authenticate connections to this i.LON 10 using the MD5 authentication key or the text secret phrase configured into the i.LON

Echelon, LON, LONWORKS, LNS, LonTalk, LonBuilder, LonManager, Neuron, 3120, 3150, LONMARK, NodeBuilder, and the Echelon logo are trademarks of Echel

Table of Contents Table of Contents ...

hospital’s emergency power generator for various alarm conditions. Alarms initiate connections to an LNS service center where the alarm is processed

i.LON 10 Ethernet Adapter, PL model These hardware inputs and outputs have the following functions: Power LED Green LED that illuminates steadily

kHz. This LED is only on the power-line version. Power Input Barrel connector power supply input for use with the included power supply (Echelon mod

10. Click Setup and enter the IP parameters in the setup page as described in Configuring the i.LON 10 Ethernet Adapter’s IP Information, below. 11.

qualified host/domain name so the LNS server knows which LONWORKS database to open. By default, the i.LON 10 Ethernet Adapter’s host name is ilon10.

the DHCP server, the DNS server specified by DHCP will be used. Configuring the i.LON 10 Ethernet Adapter to Communicate With An LNS Server Once your